Hallo.
Ich habe eine frage an Polyvar-Besitzer. Ich habe kürzlich ein Reichert Polyvar-Mikroskop mit einem übertragenen DIK-System gekauft. Ich habe einen universellen kondenser PH, DF, DIK,BF und kann die Beleuchtung nicht nach Kohler einstellen. Kann mir jemand helfen?
Sebastian
You mean, you cannot find, or center, or focus the field iris? For that you need to adjust the condenser holder. It is individually adjusted between polyvars, from my experience. Havent got one at my desk these days, unfortunately.
Best wishes, René
Hallo Sebastian,
Haben Sie schon das Benutzerhandbuch (Manual) zum Polyvar?
Beste Gruesse,
Jon
Thank you.
Rene
The point is that the condenser does not reach the top, it is centered but should be some 3mm higher. The condenser holder is maximally raised, it will not go higher.
To focus the field iris I have to unscrew the front lens of the condenser a little bit.
JB
Ja, ich habe das Benutzerhandbuch gelesen.