Hauptmenü

WILD objectives tube lenght

Begonnen von arturoag75, Januar 17, 2013, 15:41:11 NACHMITTAGS

Vorheriges Thema - Nächstes Thema

arturoag75

HI ,
does somebody can tell me if WILD lenses working good on my zeiss microscope 160mm?
best
arturo

BergerN

Hallo Arturo,
solange die Objektive für 160mm Tubuslänge gerechnet wurden gibt es da natürlich keine Probleme.
Aber es kommt darauf an, ob Du nur Wild Optiken benutzen willst, oder einen Mix beabsichtigst. Davon würde ich abraten. Meine Wilds brauchen andere Okulare als meine Zeisse, und haben auch nicht die gleiche Abgleichlänge.

Lieben Gruß vom Nick

Rene

The zeiss standard cannot bring the tube low enough to be able to use the Wild  lenses (36 or 37 mm, can't remember exactly) straight away, you will need adapters for that (empty extenders or Plezy adapters). I wouldn't go that way.

Best wishes, René

Florian Stellmacher

Hello Arturo,

the Wild objectives have an alignment length of 37 mm. So you would have in general mechanical problems to use them with a Zeiss microscope, designed for an alignment length of 37 mm. So it is up to you if you would like to use adaptors... I am of the same opinion as René.

Best regards,
Florian
Vorwiegende Arbeitsmikroskope:
Zeiss Axioskop 2
Olympus BHS (DL, Pol, Multidiskussionseinrichtung)
Zeiss Axiophot (DIK und AL-Fluoreszenz)
Zeiss Axiovert (Fluoreszenz)
Wild M400 Fotomakroskop (DL, DF, AL, Pol)

arturoag75

Many thanks to all.. :D
I want use one low power only and i could have an adapter.. ;)
Arturo

Jürg Braun

Hallo Arturo

Aufgepasst, mein Wild 2x hat eine extrem lange Abgleichlänge von ca. 60mm. Da nützt auch ein Adapter nichts.

Gruss

Jürg

arturoag75

Zitat von: Jürg Braun in Januar 17, 2013, 20:55:53 NACHMITTAGS
Hallo Arturo

Aufgepasst, mein Wild 2x hat eine extrem lange Abgleichlänge von ca. 60mm. Da nützt auch ein Adapter nichts.

Gruss

Jürg

:o :o :o :( many thanks